A La Cornue oven burner that lights and then goes out almost always has a failing thermocouple or gas safety valve. The thermocouple senses the flame and holds the valve open, and when it weakens the valve closes and the burner dies.
The fix on these hand-built ranges is to replace the thermocouple or valve and confirm the flame holds steadily. There is no fault code, so the diagnosis is by symptom and by testing the gas system.
Symptom and Error Guide
| Code / Symptom | What It Means | What We Do |
|---|---|---|
Lights then dies | Thermocouple or safety valve failing | Replace the thermocouple or valve |
Weak flame | Gas pressure or partial blockage | Verify pressure, clean the burner |
Uneven oven heat | Calibration or thermostat drift | Recalibrate by hand |
What We Check
- Oven burner that lights then goes out
- Surface burner that will not ignite
- Oven that heats unevenly or runs cool
- Weak or low flame on a burner
A burner that takes longer to hold after lighting is an early sign the thermocouple is weakening. Because these ranges are craftsman-built, we protect the brass and enamel finishes throughout the repair.
Want This Handled by a Technician?
Book online or call during confirmed business hours. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
When to Call a Technician
If the fix involves the sealed system, the gas system, or a control board, or if a fault returns after you clear it, it is time to have it diagnosed properly. We serve Bronxville and nearby towns with Genuine OEM Parts and written warranty terms.